FEATURES

Aries offers a wide array of DIP jumper configurations and wiring possibilities
for all your programming needs

Reliable, electronically-tested solder connections

DIP-end cable is potted to provide strain relief

Protective covers are also provided on header

Pitch bars help maintain 0.100 [2.54] conductor spacing

10-color cable allows for easy identification and tracing

For jumper lengths under 3.000 [76.20] Consult Factory

Ordering information

No. of Conductors

Cable Length “L” (inches)

Jumper Series

Clear

See Data Sheet 11008 for other configurations and additional information.

HEADER BODY AND PITCH BAR: black UL 94V-0 glass-filled 4/6 Nylon
HEADER PINS: Brass 1/2-hard
PIN PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ]
min. Ni per SAE AMS-QQ-N-290B
CABLE INSULATION: UL Style 2697 Polyvinyl Chloride (PVC)
CABLE LAMINATE: clear PVC, self-extinguishing*
0.050 [1.27] PITCH CONDUCTORS: 28-AWG, 7/36-strand, tinned Cu per ASTM B
33
0.039 [0.99] PITCH CONDUCTORS: 26-AWG, 7/34-strand)
CABLE CURRENT RATING: 1 amp at 10°C [50°F] above ambient
CABLE VOLTAGE RATING: 300V
CABLE TEMPERATURE RATING: 176°F [80°C]
CABLE CAPACITANCE: 13.0pF/ft. [42.7pF/meter] nominal at 1MHz*
CROSSTALK: 10-ft sample, 5ns rise time with 2 lines driven; near end
4.7%; far end 4.3% nominal*
PROPAGATION DELAY: 1.5ns/ft. [4.9ns/meter] nominal*
INSULATION RESISTANCE: 10¹⁰Ω (10 ft. [3 meters] min.)

* Applies to 0.050 [1.27] Pitch Cable Only

SUGGESTED PCB HOLE SIZE: 0.033 ±0.002 [0.86 ±0.05] dia.

ALL DIMENSIONS IN INCHES [MILLIMETERS]

CONSULT FACTORY FOR OTHER SIZES & CONFIGURATIONS

ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED

CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on quantity. NOTE: Aries reserves the right to change product specifications without notice.

Wiring Table
Wire #	Series 112, 113, 114 Pin Number	Series 112X, 113X, 114X Pin Number
1	1	1
2	2	16
3	3	2
4	4	15
5	5	3
6	6	14
7	7	4
8	8	13
9	9	5
10	10	12
11	11	6
12	12	11
13	13	7
14	14	10
15	15	8
16	16	9

DIP Jumpers – Series 112, 113, and 114

FEATURES

Ordering information

Can’t Find What You're Looking For?